2 sheets of 13x19 transfers.
How to Apply Bubblegum Yum Transfers
Step 1: Seal your piece with a water based top coat
For the best results we recommend that a topcoat be applied. Be sure to let the top coat fully dry before applying the transfer.
Step 2: With the plastic backing place the transfer in the desired area.
Step 2: Cut the transfer if needed
Step 3: gently Remove the backing and place the transfer in the desired area. if you are on a large area we recommend that you tape down corners.
Step 4: Working from top to bottom, rub the design using a firm tool such as a plastic putty knife, card, or any small hard tool. peel away the clear plastic/top sheet slowly after rubbing. if any part of the transfer hasn’t adhered properly replace the clear plastic and keep rubbing and lift away.
step 5: Once the entire design has been transferred seal your project with a water based topcoat.
Congratulations! You now have a custom piece of your own!
Our very first Bubblegum Yum transfer made just for you so you can create your very own plaid art.
What's included: 2 sheets of 13x19 transfers.